大家好，我是考100分的小小码 ，祝大家学习进步，加薪顺利呀。今天说一说MySQL参数max_connect_errors分析释疑,希望您对编程的造诣更进一步.
最近一MySQL服务器，由于一些特殊因素遇到“ERROR 1129 (00000): Host “xxx” is blocked because of many connection errors. Unblock with “mysqladmin flush-hosts””，在问题解决后，在详细了解参数max_connect_errors的过程中，有些不同网络资料的矛盾描述确实让我有点迷惑和混淆（关于这个错误，本质原因是因为同一个IP在短时间内产生太多中断的数据库连接（超过max_connect_errors的最大值）而导致的），下面介绍我的探索问题、分析问题、释疑的一个过程。
首先，我在网上搜索了一些资料，不少资料信誓旦旦的介绍，密码输入错误的尝试次数超过max_connect_errors变量，MySQL就会阻塞这个客户端登录，然后我找到了官方资料关于max_connect_errors的介绍，如下所示，MySQL 5.6/5.7的介绍一致
If more than this many successive connection requests from a host are interrupted without a successful connection, the server blocks that host from further connections. You can unblock blocked hosts by flushing the host cache. To do so, issue a FLUSH HOSTS statement or execute a mysqladmin flush-hosts command. If a connection is established successfully within fewer than max_connect_errors attempts after a previous connection was interrupted, the error count for the host is cleared to zero. However, once a host is blocked, flushing the host cache is the only way to unblock it. The default is 100.
如上所示，翻译出来的话，大致如下：如果MySQL服务器连续接收到了来自于同一个主机的请求，而且这些连续的请求全部都没有成功的建立连接就被中断了，当这些连续的请求的累计值大于max_connect_errors的设定值时，MySQL服务器就会阻止这台主机后续的所有请求。相信一开始你看到这些资料，也会被“many successive connection requests from a host are interrupted without a successful connection”给弄懵，其实这个就是因为由于网络异常而中止数据库连接。网上搜索到这么一个资料：
There seems to be confusion around that variable. It does not really block hosts for repeated invalid passwords but for aborted connections due to network errors.
好吧，那么我们自己动手实验验证一下，就能弄明白到底那个是正确的。在MySQL数据库里面创建一个test账号，然后我们将max_connect_errors变量设置为3.
mysql> show variables like "%max_connect_errors%";
+--------------------+-------+
| Variable_name | Value |
+--------------------+-------+
| max_connect_errors | 100 |
+--------------------+-------+
1 row in set (0.00 sec)
mysql> set global max_connect_errors=3;
Query OK, 0 rows affected (0.00 sec)
mysql> show variables like "%max_connect_error%";
+--------------------+-------+
| Variable_name | Value |
+--------------------+-------+
| max_connect_errors | 3 |
+--------------------+-------+
1 row in set (0.00 sec)代码100分
然后我们在另外一台测试机器，以错误的密码去连接这个MySQL数据库，如下所示，即使前面输入了三次错误密码，第四次输入是也没有碰到上面错误。那么可以排除这个变量与密码错误输入有关系。
代码100分[root@mytestlnx02 tmp]# mysql -h10.20.57.24 -utest -p
Enter password:
ERROR 1045 (28000): Access denied for user "test"@"mytestlnx02" (using password: YES)
[root@mytestlnx02 tmp]# mysql -h10.20.57.24 -utest -p
Enter password:
ERROR 1045 (28000): Access denied for user "test"@"mytestlnx02" (using password: YES)
[root@mytestlnx02 tmp]# mysql -h10.20.57.24 -utest -p
Enter password:
ERROR 1045 (28000): Access denied for user "test"@"mytestlnx02" (using password: YES)
[root@mytestlnx02 tmp]# mysql -h10.20.57.24 -utest -p
Enter password:
ERROR 1045 (28000): Access denied for user "test"@"mytestlnx02" (using password: YES)
[root@mytestlnx02 tmp]#
其实，关于某个IP输入了错误密码，MySQL会在performance_schema数据库下的host_cache表中记录。它会累计记录在COUNT_AUTHENTICATION_ERRORS字段，如下所示：
mysql> use performance_schema;
Database changed
mysql> select * from host_cacheG;
*************************** 1. row ***************************
IP: 192.168.27.180
HOST: gettestlnx02
HOST_VALIDATED: YES
SUM_CONNECT_ERRORS: 0
COUNT_HOST_BLOCKED_ERRORS: 0
COUNT_NAMEINFO_TRANSIENT_ERRORS: 0
COUNT_NAMEINFO_PERMANENT_ERRORS: 0
COUNT_FORMAT_ERRORS: 0
COUNT_ADDRINFO_TRANSIENT_ERRORS: 0
COUNT_ADDRINFO_PERMANENT_ERRORS: 0
COUNT_FCRDNS_ERRORS: 0
COUNT_HOST_ACL_ERRORS: 0
COUNT_NO_AUTH_PLUGIN_ERRORS: 0
COUNT_AUTH_PLUGIN_ERRORS: 0
COUNT_HANDSHAKE_ERRORS: 0
COUNT_PROXY_USER_ERRORS: 0
COUNT_PROXY_USER_ACL_ERRORS: 0
COUNT_AUTHENTICATION_ERRORS: 4
COUNT_SSL_ERRORS: 0
COUNT_MAX_USER_CONNECTIONS_ERRORS: 0
COUNT_MAX_USER_CONNECTIONS_PER_HOUR_ERRORS: 0
COUNT_DEFAULT_DATABASE_ERRORS: 0
COUNT_INIT_CONNECT_ERRORS: 0
COUNT_LOCAL_ERRORS: 0
COUNT_UNKNOWN_ERRORS: 0
FIRST_SEEN: 2018-01-31 16:28:19
LAST_SEEN: 2018-01-31 16:28:26
FIRST_ERROR_SEEN: 2018-01-31 16:28:19
LAST_ERROR_SEEN: 2018-01-31 16:28:26
1 row in set (0.00 sec)
ERROR:
No query specified
官方资料介绍，host_cache的字段是统计被视为“阻塞”的连接错误的数量（根据max_connect_errors系统变量进行评估）。 只计算协议握手错误，并且仅用于通过验证的主机（HOST_VALIDATED = YES）。
SUM_CONNECT_ERRORS
The number of connection errors that are deemed “blocking” (assessed against the max_connect_errors system variable). Only protocol handshake errors are counted, and only for hosts that passed validation (HOST_VALIDATED = YES).
MySQL客户端与数据库建立连接需要发起三次握手协议，正常情况下，这个时间非常短，但是一旦网络异常，网络超时等因素出现，就会导致这个握手协议无法完成，MySQL有个参数connect_timeout，它是MySQL服务端进程mysqld等待连接建立完成的时间，单位为秒。如果超过connect_timeout时间范围内，仍然无法完成协议握手话，MySQL客户端会收到异常，异常消息类似于: Lost connection to MySQL server at “XXX”, system error: errno，该变量默认是10秒：
代码100分mysql> show variables like "connect_timeout";
+-----------------+-------+
| Variable_name | Value |
+-----------------+-------+
| connect_timeout | 10 |
+-----------------+-------+
1 row in set (0.00 sec)
mysql>
那么我们就构造一个网络超时引起的数据库连接被中断案例吧，我们用Linux下的netem与tc命令模拟构造出复杂环境下的网络传输延时案例，如下设置后，此时从测试服务器去访问MySQL服务器，都会出现延时11秒：
[root@gettestlnx02 ~]# ping 10.20.57.24
PING 10.20.57.24 (10.20.57.24) 56(84) bytes of data.
64 bytes from 10.20.57.24: icmp_seq=1 ttl=62 time=0.251 ms
64 bytes from 10.20.57.24: icmp_seq=2 ttl=62 time=0.330 ms
64 bytes from 10.20.57.24: icmp_seq=3 ttl=62 time=0.362 ms
64 bytes from 10.20.57.24: icmp_seq=4 ttl=62 time=0.316 ms
64 bytes from 10.20.57.24: icmp_seq=5 ttl=62 time=0.281 ms
64 bytes from 10.20.57.24: icmp_seq=6 ttl=62 time=0.377 ms
^C
--- 10.20.57.24 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5716ms
rtt min/avg/max/mdev = 0.251/0.319/0.377/0.047 ms
[root@gettestlnx02 ~]# tc qdisc add dev eth0 root netem delay 11000ms
[root@gettestlnx02 ~]# ping 10.20.57.24
PING 10.20.57.24 (10.20.57.24) 56(84) bytes of data.
64 bytes from 10.20.57.24: icmp_seq=1 ttl=62 time=11000 ms
64 bytes from 10.20.57.24: icmp_seq=2 ttl=62 time=11000 ms
64 bytes from 10.20.57.24: icmp_seq=3 ttl=62 time=11000 ms
64 bytes from 10.20.57.24: icmp_seq=4 ttl=62 time=11000 ms
64 bytes from 10.20.57.24: icmp_seq=5 ttl=62 time=11000 ms
64 bytes from 10.20.57.24: icmp_seq=6 ttl=62 time=11000 ms
64 bytes from 10.20.57.24: icmp_seq=7 ttl=62 time=11000 ms
我们在测试服务器gettestlnx02连接MySQL数据库，如下所示（注意，如果你是在通过ssh连接这台服务器的话，此时在gettestlnx02上操作会相当慢。当然你也可以在MySQL服务器模拟网络延时，或者你将connect_timeout和网络延时都设小一点）
[root@gettestlnx02 ~]# mysql -h10.20.57.24 -utest -p
Enter password:
ERROR 2013 (HY000): Lost connection to MySQL server at "reading authorization packet", system error: 0
[root@gettestlnx02 ~]#如上所示，由于网络延时超过10秒，导致连接MySQL失败，此时，你在MySQL服务器上查询host_cache表时,那么你就会看到SUM_CONNECT_ERRORS变成1了，COUNT_HANDSHAKE_ERRORS也变成了1.
那么我们反复这样折腾三次，那么你会看到SUM_CONNECT_ERRORS变成3了，COUNT_HANDSHAKE_ERRORS也变成了3了.
mysql> select * from host_cacheG;
*************************** 1. row ***************************
IP: 192.168.27.180
HOST: gettestlnx02
HOST_VALIDATED: YES
SUM_CONNECT_ERRORS: 3
COUNT_HOST_BLOCKED_ERRORS: 1
COUNT_NAMEINFO_TRANSIENT_ERRORS: 0
COUNT_NAMEINFO_PERMANENT_ERRORS: 0
COUNT_FORMAT_ERRORS: 0
COUNT_ADDRINFO_TRANSIENT_ERRORS: 0
COUNT_ADDRINFO_PERMANENT_ERRORS: 0
COUNT_FCRDNS_ERRORS: 0
COUNT_HOST_ACL_ERRORS: 0
COUNT_NO_AUTH_PLUGIN_ERRORS: 0
COUNT_AUTH_PLUGIN_ERRORS: 0
COUNT_HANDSHAKE_ERRORS: 3
COUNT_PROXY_USER_ERRORS: 0
COUNT_PROXY_USER_ACL_ERRORS: 0
COUNT_AUTHENTICATION_ERRORS: 4
COUNT_SSL_ERRORS: 0
COUNT_MAX_USER_CONNECTIONS_ERRORS: 0
COUNT_MAX_USER_CONNECTIONS_PER_HOUR_ERRORS: 0
COUNT_DEFAULT_DATABASE_ERRORS: 0
COUNT_INIT_CONNECT_ERRORS: 0
COUNT_LOCAL_ERRORS: 0
COUNT_UNKNOWN_ERRORS: 0
FIRST_SEEN: 2018-01-31 16:28:19
LAST_SEEN: 2018-01-31 17:02:10
FIRST_ERROR_SEEN: 2018-01-31 16:28:19
LAST_ERROR_SEEN: 2018-01-31 17:02:10
1 row in set (0.00 sec)
ERROR:
No query specified然后我们用netem与tc 命令在测试服务器上取消网络延迟模拟，然后去测试连接MySQL数据库，如下测试所示：
[root@gettestlnx02 ~]# tc qdisc del dev eth0 root netem delay 11000ms
[root@gettestlnx02 ~]# mysql -h10.20.57.24 -utest -p
Enter password:
ERROR 1129 (HY000): Host "192.168.27.180" is blocked because of many connection errors; unblock with "mysqladmin flush-hosts"
[root@gettestlnx02 ~]#
此时就能构造出“ERROR 1129 (HY000): Host “192.168.27.180” is blocked because of many connection errors; unblock with “mysqladmin flush-hosts””错误了。
解决方案
解决ERROR 1129 (00000): Host “xxx” is blocked because of many connection errors. Unblock with “mysqladmin flush-hosts”这个错误的方法比较多，不过有些方案都是临时方案。临时方案是指标不治本。关键还是需要解决网络错误（这个往往需要求助网络管理人员或系统管理员）
解决方法：
1、将变量max_connection_errors的值设置为一个更大的值
mysql> show variables like "max_connect_errors";
+--------------------+-------+
| Variable_name | Value |
+--------------------+-------+
| max_connect_errors | 3 |
+--------------------+-------+
1 row in set (0.01 sec)
mysql> set global max_connect_errors=150;
Query OK, 0 rows affected (0.00 sec)
mysql> 这个临时方案只是延迟触发IP被禁止访问的条件而已，而且在复杂情况或高并发的情况下，需要设置一个很大的值，否则很容易就会再次被触发。另外，变量只对当前环境生效，如果重启就会失效，如果需要永久有效，可以在my.cnf配置文件里面配置。
2：使用flush hosts
mysql> flush hosts;
Query OK, 0 rows affected (0.00 sec)
mysql> select * from performance_schema.host_cache;
Empty set (0.00 sec)
mysql>当然你也可以mysqladmin flush-hosts 命令清理一下hosts cache信息
[root@DB-Server ~]# mysqladmin --port=3306 -uroot -p flush-host
Enter password:那么host cache是什么呢？ 官方介绍如下：
The MySQL server maintains a host cache in memory that contains information about clients: IP address, host name, and error information. The server uses this cache for nonlocal TCP connections. It does not use the cache for TCP connections established using a loopback interface address (127.0.0.1 or ::1), or for connections established using a Unix socket file, named pipe, or shared memory.
简单来说，就是MySQL服务器在内存中维护一个包含客户端信息的缓存：IP地址，主机名和错误信息等。 服务器会将非本地TCP连接信息缓存起来。它不会缓存使用环回接口地址（127.0.0.1或者:: 1）建立的TCP连接，或者使用Unix套接字文件，命名管道或共享内存建立的连接。host cache信息可以通过performance_schema数据库下的host_cache表查询。
3：将变量host_cache_size设置为0
其实我想说这是一个最不靠谱的解决方法，只是让MySQL服务器不记录host cache信息而已。完全可以忽略这个方法。
mysql> show variables like "%host_cache_size%";
+-----------------+-------+
| Variable_name | Value |
+-----------------+-------+
| host_cache_size | 279 |
+-----------------+-------+
1 row in set (0.00 sec)
mysql> set global host_cache_size=0;
Query OK, 0 rows affected (0.00 sec)
mysql> select * from performance_schema.host_cache;
Empty set (0.00 sec)
mysql> 知识点延伸
关于参数max_connect_errors，不要误解其功能，这个不能作为防止穷举密码攻击的手段。如果您担心SYN泛滥攻击，max_connect_errors可能会在特定情况下帮助您。 MySQL 5.6中的PERFORMANCE_SCHEMA改进提供了有关潜在强力攻击的有意义的信息，但是只有在涉及主机缓存的情况下。关于这个可以参考博文Understanding max_connect_errors
参考资料：
http://mysqlblog.fivefarmers.com/2013/08/08/understanding-max_connect_errors/
https://dev.mysql.com/doc/refman/5.6/en/host-cache.html
https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_max_connect_errors
https://dev.mysql.com/doc/refman/5.7/en/blocked-host.html
潇湘隐者
如果你真心觉得文章写得不错，而且对你有所帮助，那就不妨小小打赏一下吧，如果囊中羞涩，不妨帮忙“推荐”一下，您的“推荐”和”打赏“将是我最大的写作动力！
本文版权归作者所有，欢迎转载，但未经作者同意必须保留此段声明，且在文章页面明显位置给出原文连接.
版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。
转载请注明出处: https://daima100.com/8892.html
